Specification
| Principal application | FMS and automated systems |
| Universal DCC CMMs | |
| TP7M EP is particularly useful when high accuracy measurement is required | |
| Sense directions | 6-axis: ±X, ±Y, ±Z |
| 3D accuracy (test to ISO 10360 Pt 2) † | TP7M N/A |
| TP7M EP <0.6 μm (<0.000024 in) | |
| Unidirectional repeatability (2σ μm) | |
| Trigger level 1 | 0.25 μm (0.00001 in) |
| Trigger level 2 | 0.25 μm (0.00001 in) |
| XY (2D) Form measurement deviation | |
| Trigger level 1 | ±0.25 μm (0.00001 in) |
| Trigger level 2 | ±0.50 μm (0.00002 in) |
| XYZ (3D) Form measurement deviation | |
| Trigger level 1 | ±0.50 μm (0.00002 in) |
| Trigger level 2 | ±1 μm (0.00004 in) |
| Trigger force (at stylus tip) | |
| XY plane | 0.02 N |
| Z axis | 0.15 N |
| Overtravel force | |
| XY plane | 0.78 N |
| Z axis | 11.75 N |
| Weight | 85 g (3 oz) |
| Maximum extension (if on a PH10 PLUS series head) | 200 mm (7.87 in) |
| Maximum recommended stylus length (M4 styli range) | 150 mm (5.91 in) stainless steel |
| 180 mm (7.09 in) GF (carbon fibre) | |
| Mounting method | Multiwired autojoint |
| Suitable interface | PI 7-3 |
| Automatic probe change | Autochange rack |