Specification
| Weight | 0.75 kg |
| Mounting orientation | Vertical or horizontal |
| Mounting fixture | Single stud (M8, M10) |
| Number of ports | 6 |
| Repeatability of stylus change (2σ) at 50 mm | Automatic ≤1 μm |
| Manual ≤2 μm | |
| Entry speed | Unrestricted |
| Module pull-off force | 800 g maximum |
| Overtravel protection | Electromechanical (5° minimum deflection) |
| LED indicators | |
| Power | Green |
| Status | Red (flashing during probe inhibit) |
| Change cycle detection | Optoelectronic beam system with Hall effect proximity sensor |
| Multi-rack usage | Up to two SCR200 units (12 ports) may be connected with a special cable |
Installation
All alignment requirements and port docking co-ordinates can be established with only eight probing points. No control signals from the CMM are required.
| Alignment adjustment | XY rotational only ±0.1 mm |
| Docking tolerance | X ±0.17, Y ±1.5 mm, Z ± 2 mm |
| Power supply / control | PI 200-3 interface |
| Cable length | 20 m maximum (PI 200-3 to SCR2000) |
| Cable connection | 6-pin miniature DIN socket |
| Set-up time | <30 minutes |
SCR200 kit
Includes:
3 stylus changing modules
Mounting kit
PS2R stylus (A-5000-3603)
Location plate
SCR200 cables
PL63S – 5 m
PL64S – 10 m
PL65S – 20 m