TM25-20 TTP module adaptor

$3,469.83

The SP25M is actually two sensors in one! – enabling the user to SCAN for form measurement or reverse engineering and TOUCH TRIGGER PROBE (TTP) for geometry.
Highly accurate scanning performance with (M3) stylus lengths from 20 mm to 200 mm together with the ability to carry Renishaw’s TP20 range of touch-trigger probe modules mean that the SP25M system provides unmatched flexibility to optimize a measurement solution to suit the application
The probe is just 25 mm in diameter, compatible with Renishaw’s PH10M/MQ, PH6M and PHS1 probe heads, and can also be mounted using a multiwired extension bar. Together these combinations permit excellent reach and access to part features.

Physical measurement range	±0.5 mm deflection in all directions in all orientations
Physical overtravel range	X,Y: ±2.0 mm
	+Z: 1.7 mm
	-Z: 1.2 mm
Resolution	Capable of < 0.1 μm
Spring rate	0.6 N/mm to 0.2 N/mm – dependent on stylus length
Dimensions	∅25 mm x length dependent on module used
Mass	SP25M body: 65 g
	SM25-1 scan module: 35 g (includes SH25-1, but excludes stylus)
	SM25-2 scan module: 40 g (includes SH25-2, but excludes stylus)
	SM25-3 scan module: 49 g (includes SH25-2, but excludes stylus)
	SM25-20 TTP module: 40 g (includes TP20 standard, but excludes stylus)
Mounting	Multiwired autojoint connection:

	compatible with PH10M PLUS, PH10MQ PLUS, AND PH6M
	may be mounted to autojoint extension bars

Signal Outputs	Non-linear and non-orthogonal analog outputs – rate, gain, and resolution are not fixed
Interface	AC3 card

TM25-20 TTP module adaptor

Additional information

Weight	1 lbs
Dimensions	6 × 6 × 6 in