| SKU | type | Price | Buy |
|---|---|---|---|
| NC4-F300-kit | NC4 F300/240 with NCi-6 kit | $5,173.59 | |
| NC4-F230-kit | NC4 F230/170 with NCi-6 kit | $5,173.59 | |
| NC4-F145-kit | NC4 F145/85 with NCi-6 kit | $5,173.59 | |
| NC4-F115-kit | NC4 F115/55 with NCi-6 kit | $5,173.59 | |
| A-4114-5060 | NC4 S800 with NCi-6 kit | $4,855.53 | |
| A-4114-5065 | NC4 S1500 with NCi-6 kit | $4,855.53 | |
| A-4114-5070 | NC4 S2000 with NCi-6 kit | $4,855.53 | |
| A-4114-5075 | NC4 S3000 with NCi-6 kit | $4,855.53 | |
| A-4114-5080 | NC4 S5000 with NCi-6 kit | $4,855.53 |
| Repeatability | ±1.0 μm (0.00004 in) |
| Minimum tool diameter | Measurement: 0.03 mm (0.0012 in) |
| Breakage: 0.03 mm (0.012 in) |
* or larger, depending on the separation and set-up
NC4 fixed system retrofit kits
Include:
NC4 fixed unit with 12.5 m cable
NCi-6 interface
Air regulator kit
Air blast solenoid kit
Ø24 mm OD steel braided conduit
Mounting plate
Tool setting software
Installation and application support
Note: When ordering a separate system retrofit kit, the customer must select an NC4 based on its operating range. In addition, the customer must select tool setting software based on the control type. Brackets and an adjusting method are also needed for NC4 separate systems. These are not included with NC4 separate systems and must be ordered additionally. Mounting brackets for various machines are continually developed. Contact us for the latest list of compatibility. Bracket installation is not included with the standard separate system retrofit price, this service can be quoted upon request.
NC4 IAB fixed kits
NC4 F300/240 with NCi-6 kit
Separation 240 mm
NC4 F230/170 with NCi-6 kit
Separation 170 mm
NC4 F145/85 with NCi-6 kit
Separation 85 mm
NC4 F115/55 with NCi-6 kit
Separation 55 mm
NC4 separate system retrofit kits
Include:
NC4 separate unit with 12.5 m cable
NCi-6 interface
Air regulator kit
Ø17 mm OD steel braided conduit
Tool setting software
Installation and application support
Note: When ordering a separate system retrofit kit, the customer must select an NC4 based on its operating range. In addition, the customer must select tool setting software based on the control type. Brackets and an adjusting method are also needed for NC4 separate systems. These are not included with NC4 separate systems and must be ordered additionally. Mounting brackets for various machines are continually developed. Contact us for the latest
list of compatibility. Bracket installation is not included with the standard separate system retrofit price, this service can be quoted upon request.
NC4 S800 with NCi-6 kit
Separation 500 mm – 800 mm
NC4 S1500 with NCi-6 kit
Separation 800 mm – 1500 mm
NC4 S2000 with NCi-6 kit
Separation 1500 mm – 2000 mm
NC4 S3000 with NCi-6 kit
Separation 2000 mm – 3000 mm
NC4 S5000 with NCi-6 kit
Separation 3000 mm – 5000 mm