SH25-1 stylus holder only

$202.74

The SP25M is actually two sensors in one! – enabling the user to SCAN for form measurement or reverse engineering and TOUCH TRIGGER PROBE (TTP) for geometry.
Highly accurate scanning performance with (M3) stylus lengths from 20 mm to 200 mm together with the ability to carry Renishaw’s TP20 range of touch-trigger probe modules mean that the SP25M system provides unmatched flexibility to optimize a measurement solution to suit the application
The probe is just 25 mm in diameter, compatible with Renishaw’s PH10M/MQ, PH6M and PHS1 probe heads, and can also be mounted using a multiwired extension bar. Together these combinations permit excellent reach and access to part features.

SKU: A-2237-1301 Categories: ,
Physical measurement range ±0.5 mm deflection in all directions in all orientations
Physical overtravel range X,Y: ±2.0 mm
+Z: 1.7 mm
-Z: 1.2 mm
Resolution Capable of < 0.1 μm
Spring rate 0.6 N/mm to 0.2 N/mm – dependent on stylus length
Dimensions ∅25 mm x length dependent on module used
Mass SP25M body: 65 g
SM25-1 scan module: 35 g (includes SH25-1, but excludes stylus)
SM25-2 scan module: 40 g (includes SH25-2, but excludes stylus)
SM25-3 scan module: 49 g (includes SH25-2, but excludes stylus)
SM25-20 TTP module: 40 g (includes TP20 standard, but excludes stylus)
Mounting Multiwired autojoint connection:
compatible with PH10M PLUS, PH10MQ PLUS, AND PH6M
may be mounted to autojoint extension bars
Signal Outputs Non-linear and non-orthogonal analog outputs – rate, gain, and resolution are not fixed
Interface AC3 card

SH25-1 stylus holder only
The SH25 range of stylus holders enables accurate scanning measurements with effective stylus lengths ranging from 20 mm – 400 mm. They have a kinematic coupling that connects to their respective SM25 scanning modules to provide a repeatable connection that eliminates the need for probe requalification after a change. The stylus holders are designed to only fit with their respective scanning module. They should be used with Renishaws M3 range of styli.
The SH25-1 stylus holder has an effective stylus reach of 20 mm – 50 mm.
Please note: The SH25-1/2/3/4 holders are recommended for use with linear stylus arrangements, while the SH25-5 and SH25-2A/3A/4A holders are recommended for use with cranked and star stylus arrangements.

Additional information

Weight 1 lbs
Dimensions 9 × 6 × 4 in