ABSOLUTE Digimatic Indicator ID-C – Series 543 – Specially Designed for Bore gage Application

$466.20

The new Bore Gage-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock to prevent accidental changing of settings during operation.
Parameter setting software makes it easy to set all available parameters. (optional)
Fast measurement frequency allows the user to increase the number of readings per second from 10 to 50.
The minimum value holding function provides the easy detection of hole diameter.
An analog bar indicator is integrated to enhance the intuition in reading.
Go/no-go judgment is performed by setting the upper and lower tolerances.
Up to three sets of master values and upper/lower tolerance values can be memorized.
Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle Absolute Position from the origin when turned on.

Clear
SKU: N/A Category:
SKUItem Typemodel-no:Model Norangeaccuracylcd-resolution:LCD Resolution (switchable)measuring-force:Measuring ForcePriceBuyhf:att:pa_item-type
543-311BInch/Metric.5in 12.7mm.00010in/0.003mm$466.20
inch-metric
543-312BInch/Metric.5in 12.7mm.00010in/0.003mm$466.20
inch-metric
543-310BMetric12.7mm0.003mm$466.20
metric

Optional Accessories

SKUdescriptionPriceBuy
21EZA313Parameter Setting USB Cable$463.00

Features

The new Bore Gage-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock to prevent accidental changing of settings during operation.
Parameter setting software makes it easy to set all available parameters. (optional)
Fast measurement frequency allows the user to increase the number of readings per second from 10 to 50.
The minimum value holding function provides the easy detection of hole diameter.
An analog bar indicator is integrated to enhance the intuition in reading.
Go/no-go judgment is performed by setting the upper and lower tolerances.
Up to three sets of master values and upper/lower tolerance values can be memorized.
Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle Absolute Position from the origin when turned on.

Technical Data

Resolution: 0.001-0.01mm or.00005-.0005”/0.001-0.01mm
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed: Unlimited
Measuring force: 1.5N or less
Battery: CR2032 (1 pc.), 05SAA217
Battery life: Approx. 12 months under normal use
IP Rating: Equivalent to IP-42*1
*1 A protection class indication (IP=lnternational Protection) is based on the IEC 60529 /DIN40050 part 1/JIS D0207, C0920. The level indicated is valid only if the output connector cap is installed.

Function

Key Lock, Parameter Lock, PC-USB Input, Analog Bar, Fast measurement frequency, Preset (up to 3 values), Tolerance Judgment , Peak Detection (Min Only), inch/mm conversion (on inch/metric models only), Data Output Alarm: Low voltage, Counting value composition error, Overflow error, Tolerance limit setting error

Optional Accessories

905338: Connecting Cable (1m)
905409: Connecting Cable (2m)
21EZA313: Parameter Setting USB Cable

Additional information

Weight N/A
Dimensions N/A
Item Type

,

Reviews

There are no reviews yet.

Be the first to review “ABSOLUTE Digimatic Indicator ID-C – Series 543 – Specially Designed for Bore gage Application”

Your email address will not be published. Required fields are marked *