| SKU | Item Type | model-no:Model No | lug-flat-back:Lug/Flat-Back | range | accuracy | Price | Buy | hf:att:pa_item-type |
|---|---|---|---|---|---|---|---|---|
| Inch/Metric, Metric | $466.20 | inch-metric metric |
Optional Accessories
| SKU | description | Price | Buy |
|---|---|---|---|
| $6.00 | |||
| $49.65 | |||
| $463.00 | |||
| $61.20 |
Features
The new Peak Hold-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock to prevent accidental changing of settings during operation.
Parameter setting software makes it even eay to set all available parameters.
An analog bar provides easy-to-read values when scanning for Max, Min and TIR Values.
The maximum, minimum or runout value can be displayed during measurement.
Go/no-go judgment is performed by setting the upper and lower tolerances for max., min. and runout values.
High speed sampling ratio of 50 times/s.
Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle Absolute Position from the origin when turned on.
Technical Data
Resolution: 0.001-0.01mm or .00005-.0005”/ 0.001-0.01mm Display: LCD
Length standard: ABSOLUTE electrostatic capacitance-type linear encoder
Max. response speed: Unlimited
Measuring force: 1.5N or less
Battery: CR2032 (1 pc.), 05SAA217
Battery life: Approx. 12 months under normal use
IP Rating: Equivalent to IP-42*1
*1 A protection class indication (IP=lnternational Protection) is based on the IEC 60529 /DIN40050 part 1/JIS D0207, C0920. The level indicated is valid only if the output connector cap is installed.
Function
Key Lock, Parameter Lock, PC-USB Input, Analog Bar, Fast measurement frequency, Preset (up to 3 values), Tolerance Judgment , Peak Detection , Calculation (Ax), inch/mm conversion (on inch/metric models only) Counting direction switching, Data Output Alarm: Low voltage, Counting value composition error, Overflow error, Tolerance limit setting error
Optional Accessories
905338: Connecting Cable (1m)
905409: Connecting Cable (2m)
21EZA313: Parameter Setting USB Cable
21EZA198: Spindle lifting lever (12.7mm ISO/JIS type)
21EZA199: Spindle lifting lever (12.7mm ASME/AGD type)
21EZA105: Lifting Knob (12.7mm/.5” ISO/JIS models)
21EZA150: Lifting Knob (12.7mm/.5” ASME/AGD models)
21EZA197: Lifting Knob (for 25.4/1”mm models)
21EZA200: Lifting Knob (for 50.8/2”mm models)
540774: Spindle lifting cable
Reviews
There are no reviews yet.