ABSOLUTE Digimatic Indicators ID-F Series – with Back-Lit LCD Screen

Optional Accessories

Features

With the ABSOLUTE Linear Encoder technology, once the measurement reference point has been preset it will not be lost when the power is turned on.
GO/±NG judgment is performed by setting the upper and lower tolerances. If a judgment result is out of tolerance, the display backlighting changes from green to red, so tolerance judgment can be made at a glance.
An analog bar indicator has been integrated to handle upper/lower limit approaching and zero approaching. It enhances the ease of operation in the same manner as a dial indicator. The display range of the analog bar can be changed.
With SPC data output.

Technical Data

Accuracy: Refer to the list of specifications.
Resolution: 0.01mm/0.001mm or .00005”/.0001”/.0005”/.001”/0.001mm/0.01mm
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed: Unlimited
Measuring force: 1.8N/2.3N* or less (*50mm range models)
Power supply: 9V DC (via AC adaptor)

Function

Origin-set/Preset, Zeroset, GO/±NG judgment, Max/Min value
hold, Runout measurement, Resolution switching, Counting
direction switching, Power ON/OFF, Data output,
inch/mm conversion (on inch/metric models only)
Alarm: Low voltage, Counting value composition error,
Over-flow error, Tolerance limit setting error

Standard Accessories

06AEG302JA: AC Adapter 120v
137693: Lifting Lever

Optional Accessories

936937: SPC cable (40” / 1m)
965014: SPC cable (80” / 2m)
540774: Spindle lifting cable (stroke: .4” / 10mm)
02ACA571: Auxiliary spindle spring for 25mm/1” models*
02ACA773: Auxiliary spindle spring for 50mm/2” models*
264-504-5A: Digimatic Min-processor DP-1VR
543-004-1: Digimatic presetter